ATQ Series Hot Water Duct Coils
Meets ARI 410 Standards
1, 2 and 3 Row Hot Water Duct Coils
Galvanized Steel 18 gauge frame w/1” flanges 0.005” thickness Aluminum Fins,
1/2” OD X 0.015 wall Copper Tubing,
Max 500 PSI Operating Pressure.
Max 2500 PSI Ultimate Pressure.
BTU outputs from 5,000 to 360,000.
CFM Ranges from 100 to 8000

High Performance
AQH Series Hot Water Duct Coils
2 and 3 Row Hot Water Duct Coils
Galvanized Steel 18 gauge frame w/1” flanges
Sine Wave Aluminum Fins.
3/8” OD X 0.014 wall Copper Tubing,
Max 500 PSI Operating Pressure.
Max 2500 PSI Ultimate Pressure.
Hot Water BTU outputs from 23,000 to 221,000
Hot Water CFM Ranges from 300 to 2900
Horizontal/Vertical Installation.
3 Row Chilled Water Horizontal Only
500-2200 CFM, 12,000-56,000 BTU

AXQ Series ( Cased Hot Water Coils)
Custom Fit On Most AHU
Galvanized Embossed Steel Case
3/8” OD X 0.012 wall Copper Tubing,
Max 450 PSI Operating Pressure.
Max 2250 PSI Ultimate Pressure.
BTU outputs from 30,000 to 150,000
CFM Ranges from 400 to 2200
Horizontal/Vertical Installation.

ATS Series Steam Coils

1and 2 Row, Built to ARI Standard
Galvanized Steel 18 Gauge Frame and 1” flange
0.005” thickness Aluminum Fins
1/2” OD X 0.025 wall Copper Tubing,
BTU Outputs from 70,000 to 347,000
Vertical/Horizontal Installation
1 Year Warranty

ACWH Series Chilled – Hot Water Coils

Horizontal 3 & 4 Row Cased Chilled Water Coils for duct applications.
3/8’copper tube with aluminum fins ratings for hot water are also available.
All units are leak tested to 400 PSI. Drain Pan  Included.

ACCW Series Multi-Position
Cased Chilled –Hot Water Coil

NEW! Dual Drain Pan Units are perfect for Geothermal and Radiant Floor Heat back up Applications, as well as standard chiller and boiler applications.  Better by Design….1.5 –10 ton

ADCX-H Series Horizontal DX Coil

Our New Horizontal DX units can be used with R22 or R410a.  These units come with a piston style orifice which can easily be changed to utilize an expansion valve.  Sizes from 1.5 to 10 ton are available.

ADCX-A Series Upflow DX Coil

Our New Uncased “A” DX units can be used with R22 or R410a.
These units come with a piston style orifice which can easily be changed to utilize an expansion valve.  Sizes from 1.5 to 5 ton are available.

ADCX-M Series Upflow DX Coil

Our New Uncased “M” DX units can be used with R22 or R410a.  These units come with a piston style orifice which can easily be changed to utilize an expansion valve.
Sizes from 1.5 to 10 ton are available.




If you have any questions or need to further discuss your specific coil needs, please contact us or send an email to sales@directcoil.com